Draw your room. Get every cut.

FloorLayGuide plans your floor one piece at a time: where it goes, what length to cut, and which offcut to reuse. You just measure, cut and lay.

From floor plan to finished floor

  1. Draw the room

    Type the sizes of a rectangle or L-shaped room, or click out any outline, including angled walls.

  2. Pick a pattern and plank size

    Straight, brick, third offset, diagonal, herringbone or chevron, with the plank size from the box, starting from the corner you choose.

  3. Choose your material

    Laminate, vinyl, wood or tile. The right expansion gap, shortest piece and joint stagger are filled in for you.

  4. Lay piece by piece

    Every piece shows its exact cut, which offcut to reuse and where it goes. The cut list and shopping list come with it.

Questions

How does the planner work out every cut?

It takes your room outline, subtracts the expansion gap and lays your plank size row by row from the start corner. Each row starts with a reusable offcut where possible, end joints stay apart, and no end piece gets shorter than the minimum you set.

Can I use normal click laminate for herringbone?

No. Herringbone and chevron need dedicated A and B planks with mirrored click profiles. Standard click planks will not lock together in those patterns. More about herringbone.

How much extra flooring should I buy?

The planner counts the exact planks used and adds a spare margin: about 5% for straight click floors, 10% for tile, and 10–15% for diagonal, herringbone and chevron. How much flooring to buy.

Is my plan saved?

Your plan is saved in this browser only, on this device. Your room and plank sizes are never uploaded.