Most flooring guides explain the method in general terms and leave the hard part to you: working out where the first row goes, how long each piece should be, and whether the offcut is long enough to reuse. FloorLayGuide does that part for your exact room.
How the plans are made
The planner subtracts the expansion gap from your room outline, sets out the rows or pattern from your start corner, and checks every piece against common installation rules: minimum piece length, joint stagger, minimum row width and the right gap for the material. It reuses offcuts the way an experienced installer would, and counts the planks actually needed.
How we check our information
Different parts of the site rest on different sources, and we would rather say so plainly:
- Wood floors. The solid and engineered wood pages, and the wood parts of the guides on acclimatising, expansion gaps, subfloor preparation and underlay, have been checked against the NWFA Wood Flooring Installation Guidelines (2025 edition). NWFA is the US National Wood Flooring Association and writes for North America; in Europe, national codes such as BS 8201 (UK) and DIN 18356 (Germany) apply, and climate ranges often differ, so the maker's instructions are the reference there. Each wood page says this at the bottom.
- Laminate and vinyl. These follow common manufacturer instructions. They vary more between products than wood does, so the instructions in your box always win.
- Tile. Our tile advice has not yet been checked against the TCNA Handbook. Follow the tile, adhesive, membrane and backer board makers' instructions.
Products differ, and your product's instructions decide the warranty. When in doubt, ask the retailer or manufacturer.
Every guide has a link to report an error. We fix mistakes as soon as we hear about them, and list the important ones here.
Corrections
- October 2026, wood floors: updated to the 2025 NWFA guidelines. Vapour retarders over wooden subfloors now depend on whether the space below is heated. Acclimatising wood is now based on moisture content rather than a fixed number of days, with the room range taken from the maker's instructions (NWFA's North American range is 30–50% relative humidity). The expansion gap for wood is now the board thickness, end joints at least twice the board width apart, and nail spacing depends on board width.
- October 2026, underlay: red rosin paper was wrongly listed as a moisture retarder under solid wood. The advice on which way to run new boards over old floorboards was wrong and has been corrected. Tile over floorboards now needs a plywood layer first, not backer board alone. 6 mil polyethylene was wrongly given as 0.2 mm; it is about 0.15 mm.
How we make money
The planner is free. Some product links on this site are Amazon affiliate links: as an Amazon Associate I earn from qualifying purchases, at no extra cost to you. We only link to the kind of products a plan actually calls for.
Who runs this site
FloorLayGuide is run by Diego. You can also find me on LinkedIn.
Contact
Questions, corrections or ideas for the planner? Readers who install floors for a living are especially welcome to point out anything that looks off. Email mr.diego123@hotmail.com.
Collaborations and advertising
Flooring brands, tool makers, retailers and other businesses are welcome to get in touch about collaborations, product reviews, sponsored guides or advertising. Email mr.diego123@hotmail.com with a short description of your company and what you have in mind. Sponsored content will always be clearly marked as sponsored.